Guides · Updated 20 November 2026

Rehabilitation software: bringing together therapy devices, assessments and progress

A rehabilitation clinic does not work with one rehabilitation software, but with several: hospital and administration system, therapy planning, therapy documentation and the software of the individual devices. What is usually missing is the system that brings readings, assessments and patient feedback from all devices together in one history. This is exactly where it is decided whether therapy success can be shown, managed and documented.

In a rehabilitation clinic, dozens of measurements are taken in a single day: on the gait trainer, on the force plate, during gait analysis, in the assessment, in conversation with the therapist. Almost every one of them ends up in a different program. Anyone who wants to know how a patient develops over six weeks has to gather the values together. This guide sets out which kinds of rehabilitation software exist, where the gap lies and what you should look for when choosing.

Which software a rehabilitation clinic needs

Anyone searching for rehabilitation software finds very different products. Most facilities work with several systems, each of which takes on one task.

Type of softwareTaskTypical content
Hospital and administration system (HIS)Admission, bed management, record, billingMaster data, diagnoses, reports, payers
Therapy planningWho treats whom, when, whereAppointments, rooms, therapists, groups
Therapy documentationDocumenting services providedServices, duration, brief findings
Manufacturers’ device softwareControlling and analysing one deviceRaw data, reports from one device
History and data platformBringing together all readings and assessments per patientDevice values, assessments, feedback, scores, history

The first three are in place in most facilities. Device software comes with each device. The last category is often missing. In that case, every reading stays in the program in which it was created.

Where the gap lies: data from many devices

In neurorehabilitation in particular, teams work with many specialist systems: gait and arm robotics, gait analysis, force plates, EMG and isokinetics. Each one stores data separately, and many are considered difficult to connect. In orthopaedic rehabilitation, there are also strength and training devices, jump and gait analyses and, increasingly, data from home.

Many teams know the consequences:

  • Findings are created manually: values are exported from several programs, retyped or attached as a PDF.
  • The history is missing: individual measurements exist, but not side by side over time.
  • Deviations are noticed late: whether a patient is behind the expected course often only becomes apparent in the case conference.
  • Therapy success is hard to document: figures for quality reports and payers are gathered together laboriously.

How devices are connected technically is described in the guide Connecting medical devices.

Recording assessments and feedback digitally

Not everything comes from a device. Clinical assessments such as the Barthel Index, the Timed Up and Go test or the 10-metre walk test, therapists’ assessments and the patients’ own feedback are just as much part of the history. On paper, they cannot be analysed.

They are recorded digitally in two ways:

  • By the team: forms on a tablet or PC, with scales, selection fields and follow-up questions that only appear when they are relevant. In the Datico® Life Hub, such forms are created with Smart Forms.
  • By the patients: questionnaires and feedback in an app, scheduled and tailored to the clinical picture, for example on pain, strain or everyday life. This is what the Datico® Life App is for.

What matters is that both end up in the same history as the device data. Only then can you see, for example, whether a better result on the gait trainer also carries over into everyday life.

From reading to therapy history

Once all of a patient’s data is in one place, many individual values become a history. Three tools help with this:

  • Classify: with Reference Sets, each reading is automatically assigned to an evaluation zone, adjusted for example to sex and age group.
  • Condense: with Index Management, you combine device values, assessments and feedback into a score that is recalculated as soon as new data is available.
  • Compare: each history is compared with an expected corridor per indication. Patients whose progress is not as expected are noticed early.

Datico® sees itself as data-driven decision support. The data shows where a patient stands; the team decides on the therapy.

Documenting outcome quality

Payers, quality management and the clinic’s own management want to know what rehabilitation achieves. This requires the same measures at fixed points in time, for example at admission, midway and at discharge, and an analysis across many patients.

If the data is held in structured form in one system, such analyses are created without manual work: as a report per patient for the record and as an overview per indication for quality management. Over time, this grows into your own treatment database, which is also available for research and your own analyses. What needs to be considered for AI analyses is described in the guide AI and health data.

Connection to the HIS

The history is most useful when the results arrive where doctors look for them. A history platform should therefore receive orders from the hospital information system (HIS) and return findings to it, as individual values and as a report.

In the Datico® Life Hub, this is handled by the HIS Connector. How orders and findings flow between the HIS and the subsystem is explained in the guide HIS interface.

An example from neurorehabilitation

With the Datico® Life Hub, the Neurological Rehabilitation Centre Rosenhügel in Vienna brings together the data from nine connected diagnostic and therapy systems and the assessments of its therapists in one consolidated finding, independently of the manufacturer and with an automated connection to the HIS. The goal is its own treatment database.

What this looks like for your specialty is shown on the pages Neurorehabilitation and Orthopaedic rehabilitation.

Choosing rehabilitation software: criteria

These questions help you evaluate a history and data platform for rehabilitation.

  1. Devices: can your existing devices be connected, including older ones and those without a standard interface? Is there a list of systems already connected?
  2. Individual values: do the readings arrive as structured data or only as a PDF?
  3. Assessments: can you map your assessments and questionnaires yourself, without programming?
  4. Patients: is there an app through which patients give feedback, and does the team control what they see?
  5. History and analysis: can reference values, scores and expected courses per indication be stored?
  6. HIS: are orders received from the HIS and findings returned, via HL7, FHIR or GDT?
  7. Data protection: where is the data stored, are there roles and rights, an audit trail and a data processing agreement?
  8. Independence: do you remain able to act when you change devices or the HIS, and can you export your data at any time?
  9. Getting started: can you begin with one area or one device and expand later?

The Datico® Life Hub is built for exactly this task: it connects devices independently of the manufacturer, brings device data, assessments and feedback together in one history and returns findings to the HIS. The data is held in a separate database per clinic on servers in Germany or in your own infrastructure. If you would like to start with a single device, there are Building Blocks for this that can later be expanded into the platform. Talk to us in a personal initial consultation, or try the Datico® Life Hub free of charge for 30 days.

Frequently asked questions

What is rehabilitation software?

Rehabilitation software is an umbrella term for the programs that rehabilitation clinics, therapy centres and practices work with: administration and billing, therapy planning, therapy documentation, the software of therapy and diagnostic devices, and systems that bring readings and assessments together in one history. A single program rarely covers everything.

Which software do I need for neurorehabilitation?

In addition to the hospital and planning system, above all a solution that connects the many specialist systems of neurorehabilitation: gait and arm robotics, gait analysis, force plates, EMG and isokinetics. What matters is that their readings end up, together with assessments and patient feedback, in one history per patient and go to the hospital information system (HIS) as a finding.

How can assessments in rehabilitation be recorded digitally?

With digital forms that therapists fill in on a tablet or PC, and with questionnaires that patients answer themselves in an app. What matters is that the results do not sit on an island of their own, but appear in the same history as the device data, so that they can be analysed together.

Does Datico® replace therapy planning or billing?

No. Datico® is not a HIS, not billing software and not therapy planning software. The Datico® Life Hub supplements these systems with measurement, assessment and progress data. It can receive orders from the HIS and returns findings to it.

How do I document therapy success in rehabilitation?

By collecting the same measures at fixed points in time, for example at admission, during the stay and at discharge, and comparing them with an expected course per indication. If device values, assessments and feedback are held in structured form in one system, reports on therapy success are created without manual work.

Which devices can be connected to rehabilitation software?

That depends on the system. The Datico® Life Hub connects therapy and diagnostic devices independently of the manufacturer, via standards such as HL7, FHIR and GDT, via manufacturer interfaces or file exports. Which systems are already connected is shown in the compatible systems overview.

Related features

Markus Stadler, Managing Director
Markus Stadler Managing Director, Datico®

Let’s talk about your project.

“In 30 minutes we clarify what you want to achieve and which of your devices we will connect. Personally and without a sales loop.”

+49 8677 76794-0 info@datico.com