Let’s talk about your project.
“In 30 minutes we clarify what you want to achieve and which of your devices we will connect. You speak directly with me.”
Datico® Life Hub
Your devices stay. We connect them.
Datico® is vendor-independent. You don’t have to replace any devices or commit to any one supplier. We connect what you already use – via three routes.
Devices and systems
We connect diagnostic, therapy and training devices as well as clinical systems via common standards: HL7, FHIR, DICOM and GDT/EDT. Where a device does not support a standard, we use the manufacturer’s interface.
Ergometers and treadmills, cardiopulmonary exercise testing, strength and therapy equipment, robotics and gait trainers, force plates and jump diagnostics, gait analysis, body composition analysis, laboratory, hospital information systems.
Several systems in sync
In exercise tests, several systems run at the same time: an altitude or climate chamber, an ergometer and sensors on the test subject, for example. Live Control captures all data in sync and displays it during the test.
Wearables and sensors
We capture wearables from different manufacturers in three ways: via cloud integration, via Bluetooth directly through the Datico® Life App, or via file import. Heart rate, sleep, recovery, activity and load all end up in the same history.
Which devices do you use?

aktivSYSTEM – cross-manufacturer training software for the training floor – Manufacturer interface to the aktivSYSTEM
With the aktivSYSTEM, aktiv konzepte digitalises the training floor across manufacturers. Via the Device Connector, Datico® imports selected training data such as exercises, equipment settings, loads and repetitions. Over time, these sit alongside findings, diagnostic, wearable and questionnaire data.

AirRoom hypoxic chambers and mask systems for altitude training – Live Control, Device Connector and Datico® API
Altitude Balance develops hypoxic chambers and mask systems for altitude training. Via Live Control, Datico® captures environmental data such as oxygen concentration, altitude and climate in sync with training and vital data and displays it during the test.

ANT+-compatible sensors, e.g. for heart rate, power and cadence – ANT+ (wireless standard)
ANT+ is a cross-manufacturer wireless standard for sensor data in fitness and health. Via Live Control, Datico® captures the data from ANT+-compatible sensors in sync with other systems.
Force plates and systems for posture and balance analysis – Reports assigned to the order via Order Entry (no open manufacturer interface)
BERTEC manufactures force plates and systems for posture and balance analysis. As no open manufacturer interface is available, Datico® automatically assigns the measurement reports to the respective order and patient via the Device Connector and Order Entry. At NRZ Rosenhügel they feed into the consolidated posture and gait analysis report.

Systems for isokinetic strength diagnostics – XML export (no open manufacturer interface)
Biodex manufactures systems for isokinetic strength and function diagnostics, used in neurology, orthopaedics and sports medicine. Via the Device Connector, Datico® imports the exported measurement data, including the force-time curves. This allows the raw data to be used for your own analyses and reference comparisons.

Bluetooth-enabled sensors and wearables – Bluetooth (wireless standard)
Bluetooth is a widely used, energy-efficient wireless standard for sensors and wearables. Datico® connects Bluetooth devices directly via Wearable Connect using the Datico® Life App and via Live Control, without a detour through a manufacturer cloud.

Systems for 3D motion analysis and motion capture – Import of analysis results without a standardised interface
BTS Bioengineering offers systems for 3D motion analysis and motion capture. Because there is no standardised interface, the Device Connector imports the analysis results via a dedicated route based on the workflows. The results are then available centrally for documentation and analysis.

Video-based motion analysis with TEMPLO® and force plates – Bidirectional manufacturer interface with Order Entry
CONTEMPLAS from Kempten develops video-based motion analysis with its TEMPLO® software as well as force plates. Datico® requests examinations via Order Entry and receives the results back automatically – discrete measurements as well as finished reports.

Systems for cardiopulmonary exercise testing, metabolic analysis and body composition via the Omnia software – HL7 via the Omnia software
COSMED manufactures systems for cardiopulmonary exercise testing, metabolic analysis and body composition. Via an HL7 interface to the Omnia software, the system passes tests to Datico® as events. Because the integration is built on Omnia, it applies to the COSMED systems that are brought together there.

Medical training equipment from the motion cardio line and training consoles from the motion intelligence line – Real-time device protocol (Live Control); alternatively via the aktivSYSTEM (Device Connector)
Emotion Fitness is a German manufacturer of medical training equipment (Class IIa medical devices, according to the manufacturer). Via Live Control, the devices are controlled and read out in real time; alternatively, they can be connected via the aktivSYSTEM. Datico® combines the training data in sync with heart rate, oxygen saturation and environmental data.

Ergometry systems for cardiological diagnostics and rehabilitation – Real-time ergoline protocol
ergoline manufactures ergometry systems for cardiological diagnostics and rehabilitation. Via the ergoline protocol, Live Control captures watts, cadence and heart rate in real time and synchronises them with wearables and environmental data.
SpeedLab for speed, reaction and neurocognitive diagnostics – Manufacturer interface, bidirectional
With the SpeedLab, Global Speed develops systems for speed, reaction and neurocognitive diagnostics. Datico® passes athlete and test information to the SpeedLab and imports test results, reaction parameters and time series via the Device Connector.

Treadmills and ergometers for medicine and elite sport – coscom protocol, bidirectional
h/p/cosmos manufactures treadmills and ergometers for medicine and elite sport. Via the coscom protocol, Live Control controls speed and incline in real time and captures the data in sync with wearables and environmental data from climate, altitude or hypoxic chambers.

Happyneuron Pro – cognitive tests and cognitive training – Jointly agreed API interface
Happyneuron Pro offers cognitive tests and training, including for neurorehabilitation. Via a jointly agreed API interface, Datico® imports test type, difficulty level and results and analyses them in sync with physiological data.

Rehabilitation robotics, including Lokomat, Armeo, Erigo and Andago – Bidirectional manufacturer interface with Order Entry
Hocoma manufactures robotics for neurological rehabilitation, including Lokomat, Armeo, Erigo and Andago. Datico® sends orders to the Hocoma system via Order Entry and receives results and the results report back automatically – and on request all the way into the hospital information system. At NRZ Rosenhügel in Vienna, an Armeo system is connected in this way.

Altitude chambers, pressure systems and climate simulation – Device Connector, Live Control and Datico® API (REST)
JFJ develops systems for environmental simulation: altitude chambers, pressure systems and climate simulations. Datico® serves as the central data back end, bringing simulation, training and analysis together in one dataset.

Bluetooth-enabled pulse oximeters – Bluetooth via Live Control
Nonin Medical manufactures pulse oximeters. Via Live Control, Bluetooth-enabled Nonin oximeters transmit oxygen saturation (SpO₂) and pulse rate to Datico® in real time – during altitude training, for example, together with the load data from other systems.

Systems for surface EMG and biomechanics – GDT, bidirectional
Noraxon is a US manufacturer of systems for surface EMG and biomechanics. Via a bidirectional GDT interface, Datico® imports not only reports but also the detailed EMG data.

Visual field diagnostics with the Twinfield software – GDT via Twinfield
Visual field diagnostics from OCULUS are connected via a GDT-based handover to the Twinfield software. Datico® automatically combines the individual reports of an examination into an overall finding and returns it in structured form to the hospital information system.
Wearables and heart rate sensors, including Polar Loop, sports watches and Polar H10 – Wearable Connect Cloud (Polar Flow) and Bluetooth via the Datico® Life App
Polar manufactures wearables and heart rate sensors. Datico® captures the data in two ways: via the Polar Flow cloud or by Bluetooth directly through the Datico® Life App, without a manufacturer cloud. Heart rate and training data are then available in the same timeline as all other data.

Strength and training equipment for gyms and therapy – Via the aktivSYSTEM from aktiv konzepte
SCHNELL builds strength and training equipment for gyms and therapy. Via the aktivSYSTEM from aktiv konzepte, the Device Connector imports the training data from the training floor and makes it analysable in Datico®.

System for diagnostics and training of cognitive-motor skills – Device Connector and Datico® API
Skillcourt is a system for diagnosing and training cognitive-motor skills such as reaction, decision-making, perception and motor control. Via the Device Connector and the Datico® API, the performance data is analysed together with other performance and health data.

Systems for polygraphy, polysomnography and pulse oximetry – Bidirectional between hospital information system and device software
SOMNOmedics develops systems for polygraphy, polysomnography and pulse oximetry. Via the Device Connector, sleep diagnostic and findings data is exchanged bidirectionally between the hospital information system and the device software. At NRZ Rosenhügel in Vienna, sleep diagnostics are integrated in this way.

Rehabilitation robotics, including Amadeo, Diego, Pablo, Tymo and Myro, via the Maya Patient Management Software – Via the Maya Patient Management Software; bidirectional FHIR interface in development
Tyromotion from Graz develops systems for robot- and computer-assisted neurorehabilitation. Rather than connecting each device individually, Datico® connects the central Maya Patient Management Software. A bidirectional FHIR interface is in development.

Motion laboratories with EMG, kinematics and kinetics – Manufacturer interface with raw data support
Velamed plans and integrates motion laboratories and brings EMG, kinematics and kinetics together in sync. Via an interface that supports raw data, Velamed passes all data to the Device Connector, where it is analysed together.
zebris FDM-T – pressure distribution measurement on the treadmill for gait analysis – Manufacturer interface with transfer of case data from the hospital information system
zebris develops biomechanical measurement systems for dynamic gait analysis. The zebris FDM-T is fully connected to Datico® – from the transfer of case data from the hospital information system to the return of reports and measurements. At NRZ Rosenhügel in Vienna, it runs in combination with a treadmill from h/p/cosmos.
Your data also goes out: to hospital information systems, BI tools, statistics software, Excel and to your own AI applications via the MCP Server and the Smart API.
We are continually developing new integrations, often together with the manufacturer. Get in touch.
“In 30 minutes we clarify what you want to achieve and which of your devices we will connect. You speak directly with me.”
Session cookies for basic website functions. Cannot be disabled.
Google Analytics 4 for pseudonymised analysis of website usage, delivered via Google Tag Manager.
Identification of the visiting company based on its IP address (Leadfeeder); when you submit a form, Leadfeeder links the visit history to your contact details. Also conversion tracking.
YouTube videos (privacy-enhanced mode), booking calendar (Zoho Bookings), LinkedIn content.