Editions: Professional · Enterprise

Connect

Live Control

Room, devices and body-worn sensors in one live view: you see everything time-synchronised, control centrally and analyse immediately.

How the data flows

Room, devices and body-worn sensors – live in one view

  • Room and chamberaltitude, climate and pressure chamber: oxygen, temperature, humidity, pressure
  • Exercise equipmenttreadmill, ergometer, strength and training systems
  • Cognitive and diagnostic stationscognitive tests and training, other measuring systems
  • Body-worn sensorse.g. heart rate and oxygen saturation – several per person
  • Manual inpute.g. Borg scale via tablet, at the exact moment

Datico® Live Controlone workstation, freely configurable live views

Live · Example view

Person 1 · heart rate 132bpm
Person 1 · SpO₂ 91%
Room · oxygen 15.2%
Treadmill · speed 8.5km/h
  • Datico® Life Hubstored time-synchronised, at full resolution, per person and session
  • Analysisimmediately: progress, reports, statistics, AI

Every value stays clearly assigned to one person, one device and one point in time – even when several people train in the room at once.

What the feature does

Datico® Live Control is the control centre for fixed measuring stations: altitude training rooms, climate and pressure chambers, performance diagnostics labs. It connects the room’s environmental data, exercise and training equipment, cognitive and diagnostic stations and the sensors that patients, study participants or athletes wear on their bodies – several per person and several people at once.

All values appear live in views that every user puts together themselves. At the same time they are stored time-synchronised and at the defined resolution in the Datico® Life Hub – ready for analysis per person and session straight away. You control training equipment and room systems from the central workstation, based on the overall view; derived values such as a calculated altitude or a load index are computed live. Additional information such as perceived exertion on the Borg scale is captured via tablet at the exact moment.

What makes Live Control special

  • Live views you design yourself

    Which values, which people, which display: every user builds their own live view – as a curve or a number, for one person or the whole group.

  • Stored time-synchronised

    All sources run on one shared timeline and are stored at the resolution you define. After the session the data is ready for analysis straight away – no exporting, no copying together.

  • Several people, several sensors

    Several people can train in the room at the same time, each with several sensors. Every data record stays clearly assigned to one person.

  • Control from the overall view

    Training equipment and room systems can be controlled from the central workstation – based on all live values at once. Derived values such as a calculated altitude or a load index are computed live.

What Live Control brings together

Datico® Live Control is made for fixed installations: a room, a lab, a chamber – with a local computer as the workstation. Data that otherwise stays in separate programs comes together there:

Environment
Oxygen content, temperature, humidity and pressure from altitude, climate and pressure chambers or special room installations.
Exercise and training equipment
Treadmills, ergometers, strength and training systems – with speed, incline, power or resistance.
Cognitive and diagnostic stations
Cognitive tests and cognitive training as well as other measuring and diagnostic systems.
Body-worn sensors
Heart rate, oxygen saturation and other values – from several sensors per person.
Manual input
Subjective values such as perceived exertion on the Borg scale, captured via tablet at the exact moment.

In practice: the altitude training room

The classic scenario for Live Control is the altitude training room. At the Max Planck Institute for Multidisciplinary Sciences in Göttingen, Datico® connected such a room centrally:

  • the data of the altitude training room itself,
  • an h/p/cosmos treadmill and an Emotion Fitness ergometer,
  • the Happyneuron system for cognitive training,
  • and two sensors per person: a Polar H10 for heart rate and an oxygen saturation (SpO₂) sensor from Altitude Balance.

Several people could train in the room at the same time. All values – room, equipment, cognitive tasks and body sensors – came together in one live view and were then available time-synchronised for analysis.

Live Control or Wearable Swarm?

The boundary is fluid. Live Control is the solution for the fixed measuring station where equipment, room systems and body sensors come together. If you mainly use a very large number of wearables in a large room or outdoors – many dozens to several hundred – Datico® Wearable Swarm with an on-site Bluetooth mesh is usually the better choice.

See Datico® Wearable Swarm

Frequently asked questions about Live Control

What is Datico® Live Control?

Datico® Live Control connects room systems such as altitude or climate chambers, exercise equipment, cognitive and diagnostic stations and body-worn sensors at a fixed measuring station. All values appear live in freely configurable views and are stored time-synchronised in the Datico® Life Hub.

What is Live Control typically used for?

For altitude training rooms and hypoxia chambers, climate and pressure chambers, performance diagnostics labs and group testing – wherever people work with a fixed installation and a local computer.

Can several people be measured at the same time?

Yes. Several people can train or be measured in parallel, each with several sensors. Every value stays clearly assigned to one person, one device and one point in time.

Can I design the live view myself?

Yes. Every user decides which values and people appear and in which form.

At what resolution is the data stored?

At the resolution you define. All sources are stored on a shared timeline and are available for analysis straight after the session.

Which devices can be connected?

Among others treadmills, ergometers, chambers and room systems, cognitive systems and Bluetooth sensors. Systems from h/p/cosmos, Emotion Fitness, Happyneuron, Altitude Balance and Polar, for example, are already connected. We connect further devices after reviewing their interface.

Can Live Control also control medical devices?

Controlling medical devices and medical systems is only possible on request and after a case-by-case review. Measurements from such systems can be captured and displayed regardless.

Technical key facts

SourcesRoom and chamber systems, exercise and training equipment, cognitive and diagnostic stations, body-worn sensors
Live viewFreely configurable live views per user, for one person or the whole group
StorageTime-synchronised on a shared timeline, at a defined resolution, ready for analysis immediately
PeopleSeveral people in parallel, several sensors per person, clearly assigned
Manual inputFor example the Borg scale via tablet at the exact moment
ControlTraining equipment and room systems from the central workstation; medical devices only on request
EnvironmentsAltitude training rooms, hypoxia, climate and pressure chambers, performance diagnostics lab, group testing
InstallationFixed measuring station with a local computer
Markus Stadler, Managing Director
Markus Stadler Managing Director, Datico®

Let’s talk about your project.

“In 30 minutes we clarify what you want to achieve and which of your devices we will connect. Personally and without a sales loop.”

+49 8677 76794-0 info@datico.com